Springs used for higher RPM and/or applying boost to the car . Tech Specs : Installed height pressure - 40 kg  10mm lift pressure - 97 kg  max  lift...

Springs used for higher RPM and/or applying boost to the car . Tech Specs : Installed height pressure - 40 kg  10mm lift pressure - 97 kg  max  lift...

The catch can kit is a complete set to delete the original oil separator . It allows to mount a catch to reduce significantly the oil redirected to...

The catch can plate is a direct swap on to the original oil separator . It allows to mount a catch to reduce significantly the oil redirected to...

The Dual CP3 fuel pumps kit for M57 is a must need for every engine trying to run past 550 + horsepower  - OEM single R90 pump could...

Performance oriented conical springs with retainers for EA113 2.0 TSI / TFSI engines that are going to be runing higher rpm and boost.

Performance oriented conical valve springs with retainers for EA837  3.0 TFSI / 3.2 FSI  engines that are going to be running higher rpm and boost.

Performance oriented conical valve springs with retainers for EA839 2.9T / 3.0T TFSI engines that are going to be running higher rpm and boost.

Performance oriented conical valve springs with retainers for EA888 1.8 / 2.0 TSI / TFSI engines that are going to be running higher rpm and boost.

The plate is a direct swap on for the original oil cooling system , it allows to mount an external oil cooler . The plate's inner 2 holes...

The plate is a direct swap on for the original oil cooling system , it allows to mount an external oil cooler . The plate's iner 2 holes...

The plate is a direct swap on for the original oil cooling system , it allows to mount an external oil cooler . The plate's inner 2 holes...

Springs used for higher RPM and/or applying boost to the car . Tech Specs : Installed height pressure - 35kg  10mm lift pressure - 91 kg  12 mm lift pressure...

Springs used for higher RPM and/or applying boost to the car . Tech Specs : Installed height pressure - 35kg  10mm lift pressure - 91 kg  12 mm lift pressure...

The head cooling modification for m57 is a must need for every engine runing more than 400 + horsepower or is oftenly abused like track , drift or...

Inconel head studs M47n - BMW 4 cyl engines Tech specs : Yield strength - 200000 PSI Tensile strength -  230000 PSI